| Thesis Title | Student | Section | Supervisor | Defined date of defense |
|---|---|---|---|---|
| Section | Supervisor | |||
| Production of magnetic PE/CNT nanocomposites and investigation its thermodynamic and mechancal properties | samaneh sahebian saghi | P.H.D. | Zebarjad | 0000-00-00 |
| Effect of die temperatuer on micro structure and mechanical properties of PM parts | mehdi abbasi | M.Sc. | Babakhani | 2012-09-22 |
| Effects of type and amount of impurities on reducability of Chadormaloo iron oxide concentrate during Midrex process | mohamad sadegh rezaii | M.Sc. | Vahdati Khaki | 2011-04-11 |
| effect of welding parameters on the microstructure and inclusion formation in microalloyed steels | HASSAN GHOLAMI | M.Sc. | Haddad Sabzevar | 2010-12-06 |
| Effect of temperature and strain rate on microstructure of Mg-Al alloys using hot extrustion | Ahmad Najjar Torshizi | M.Sc. | Haddad Sabzevar | 2012-01-16 |
| investigation of thermal behavior, stability and viscosity of nanofluid contan modified carbon nano tubes with TiO2 nanoparticles | sedigheh abbasi | P.H.D. | Zebarjad | 2012-09-26 |
| Synthesis of ZnO nano particles using Angooran Concentrate | mohammad hadi tamjidi | M.Sc. | Vahdati Khaki | 2013-02-11 |
| A production of Aluminum foams via Sodium Nitrate agent and an investigation of electromagnetic shielding of them | Ahmad Moloodi | P.H.D. | Babakhani | 2013-02-02 |
| Measurement of fracture energy during uniaxial tensile test for dual-phase steel using Essential Work of Fracture (EWF) aproach | Zahra Asadi | M.Sc. | Mazinani | 2010-12-06 |
| The investigations on elevated temperature oxidation mechanisms of high porous metals and metallic foams | ehsan jafari | M.Sc. | Kiani Rashid | 2013-02-25 |
| Fabrication and chracterization of solar absorber using anodizing technique | mohammad ansarinia | M.Sc. | Kashefi Torbati | 2014-08-27 |
| Study of precippitation of a super saturated Al alloy during MAF | mehdi hadian | M.Sc. | Rezaee Bazzaz | 2013-02-11 |
| Investigation the Thermal Behavior of Ti-based Bulk metallic glasses alloys with composition of Ti41.5 Zr2.5 Hf5 Cu42.5-x Ni7.5 Si1 Snx | Saber Haratian | M.Sc. | Haddad Sabzevar | 2013-02-25 |
| Pitting corrosion of alominium alloy in chloride solution containing nolybdate and tangstate ions | seyyed mohammad naboore | M.Sc. | Moayed | 2014-02-03 |
| To study the properties of hard coating fabricated on the surface of carbon steel using Fe-Ti-Al system | saeed ahadishahri | M.Sc. | Vahdati Khaki | 2014-02-03 |
| On the kinetics of the isothermal pack reduction of the hematite pellets with coal volatile matter | Saeed Movahedyan | M.Sc. | Vahdati Khaki | 2014-02-03 |
| Hardening and softening of commercially pure copper by multiaxial forging | Seyyed Mohammad Hossein Hosseini Rad | M.Sc. | Rezaee Bazzaz | 2014-02-03 |
| Investigation of microstructure variation on .... | ahmadamin khalilitabas | P.H.D. | Kiani Rashid | 2014-06-21 |
| Effect of tool geometry on the microstructure and mechanical properties in friction stir welding of severely deformed Al sheets | javad heidarpoor | M.Sc. | Beidokhti | 2015-06-01 |
| investigation on magnetic separation of nano magnetic particle from aqueous solution | Reza Izadi Vasfi | M.Sc. | Kashefi Torbati | 2015-06-01 |
| Effect of precipitates on hot deformation behaviour of Mg-8Al-xBi alloys | Reza Ghandehari | P.H.D. | Mazinani | 2015-01-28 |
| Using reductive atmosphere to synthesise gel-casted alumina-nickle composite | zahra hosseini | M.Sc. | Mollazadeh Beidokhti | 2015-06-01 |
| Production of AZ Magnesium alloy with bimodal grain structure via severe plasatic deformation in multi-axial forging | hanieh ghalibaf tousi | M.Sc. | Mazinani | 2015-06-01 |
| Effect of Oxidation/Reduction by coal of ilmenite on eliminatuion of iron content through leaching in sulphuric acid | behzad jalali | M.Sc. | Zabett | 2015-05-31 |
| Coating of nickel base foams by heat resistant materials | Jalal Mir abbassi | P.H.D. | Kiani Rashid | 2015-10-27 |
| The influence of pores steel products produced by powder metallurgy on isothermal phase transformations | seyd hossein mosavifar | M.Sc. | Kiani Rashid | 2016-08-15 |
| Improvement of energy absorption capability of aluminum tubes through imposing severe plastic deformation | mohamad ghaemi | M.Sc. | Farshidi | 2016-08-15 |
| Investigation on the erosion-corrosion resistance of carbon steel in the sulfur containing environment | Sajjad Hassanzadeh Seyyed Abad | M.Sc. | Beidokhti | 2016-08-15 |
| Investigation on the microstructure of clad stellite layers on the stainless steel substrate | Alireza Ghassemi | M.Sc. | Beidokhti | 2016-08-15 |
| Thermal prop[erties of bulk amorphous magnesium base alloy | armin bavafa | M.Sc. | Haddad Sabzevar | 2016-08-15 |
| Study of the effects of glass fibre surface treatment on mechanical properties of polyester matrix composites | monavvar hamidi | M.Sc. | Zabett | 2016-08-15 |
| Effect of Calcium Carbonate on Kinetics of Hematite reduction by Hoganas Method | Mehrdad heidarzadeh | P.H.D. | Zabett | 2016-10-26 |
| Investigation of the effects of casting parameters and chemical composition of thermoelectric nano material of PbTe type p on its thermoelectric properties | Said Jamaati | M.Sc. | Sajjadi | 2017-06-06 |
| Alumina extraction from kaolinite | Nima hamidipour | M.Sc. | Mollazadeh Beidokhti | 2017-06-06 |
| Simulation of deformation behavior during tube hydro-forming using finite element method | mohammadali dashti | M.Sc. | Farshidi | 2018-02-05 |
| Investigation the effect of Ti on the microstructure and mechanical properties of Cu powder metalurgy parts,production by SPS mettod. | Sayed Hassan Moosavi | M.Sc. | Babakhani | 2018-07-10 |
| Investigation of microstructure and mechanical properties of thin layerTi compound on the substrate steel by PVD coating technique. | Seyyed Esmaeil Shakib | P.H.D. | Babakhani | 2018-08-01 |
| Investigation of mechanical properties of carbon fiber reinforced epoxy composite | Maryam Sadat Rezaei Jamnani | M.Sc. | Sahebian | 2018-07-10 |
| Application of Metal Magnetic Memory (MMM) technique in detection of stress concentration zones in welded steels | alireza javdani fard | M.Sc. | Kashefi Torbati | 2018-07-10 |
| Cold palstic diformation effect on brass corrosion in sodium nitrite | OMID SHAMS ABADI | M.Sc. | Moayed | 2018-07-10 |
| Selective absorption of Metal ions from aqueous Solutions using magnetic hydroxyapatite synthesized through mechanochemical route | zahra khaleghi | M.Sc. | Vahdati Khaki | 2018-07-10 |
| High strength bainitic structure production in high silicon cast irons | rasul nematyar | M.Sc. | Kiani Rashid | 2019-03-04 |
| Phase transformation in ultra-high carbon, high chromium steels by thermal analyses and microstructural study | Farima Hesari motlagh | M.Sc. | Kiani Rashid | 2019-03-04 |
| Study of ultra fine grain microstructure of commercially pure copper produced by multiple compressions in a channel die using ECCI | amir molayari | M.Sc. | Rezaee Bazzaz | 2018-07-10 |
| Investigation on the bonding mechanism and microstructural changes during two-step TLP joining of dissimilar IN925/Mar-M509 superalloys | mahsa nazeran | P.H.D. | Beidokhti | 2019-03-13 |
| Effect of Direct electrical current on solidification structure of Al--x-Si -0 | Peyman Niazi Razavi | P.H.D. | Haddad Sabzevar | 2019-09-18 |
| Interlayer effect on Joining of Al and Mg Alloys using Friction Stir Welding | Roya Derakhshan hafshejani | M.Sc. | Sajjadi | 2019-12-16 |
| An investigation on the effect of microstructure and texture of X70 steel on the hydrogen diffusivity and hydrogen embrittlement | Seyed Hossein Hosseini Mortazavi | P.H.D. | Moayed | 2019-07-03 |
| Hydro metallurgical recovery of TiO2 from red mud . | Hossein Monjezi | M.Sc. | Babakhani | 2019-12-02 |
| The effect of hot ECAP process on the corrosion behavior of pure commercial grade two titanium in 3.5% NaCl solution | Sajedeh Mir | M.Sc. | Farshidi | 2019-12-02 |
| fabrication of walking robot with a hybrid composite of silicon/ ethanol/electrospun carbon nanofiber for use in mobile robots | hasti setayesh | M.Sc. | Sahebian | 2020-12-14 |
| Nano structure morphology electrodeposition of Ni-Se as an electroctalyst for electrocemical hydrogen production | Nafiseh Sadat Modghan | P.H.D. | Mirjalili | 2020-12-08 |
| superplasticity behavior in AM30 Magnesium alloy after Multi-Directional Forging | Abolfazl Sanchuli | P.H.D. | Rezaee Bazzaz | 2020-11-10 |
| Investigation of characteristics of Aluminum alloys 7xxx for substitution of Alpha-yellow brass in production of electrical connectors | Hamed Fazael Hoseini | M.Sc. | Farshidi | 2020-10-12 |
| The effect of atomsphere and temperature of synthesis process on the efficiency of the decoration process of metallic nano particles on the carbon by solution combustion synthesis process | pouria pishavar | M.Sc. | Mollazadeh Beidokhti | 2021-02-01 |
| Antibacterial behavior of Nanostructured ZnO/CuO/Clay fabricated by Solution Combustion Synthesis Method | setareh khosrovan | P.H.D. | Vahdati Khaki | 2021-01-07 |
| Study of superplasticity in Aluminum alloy 7005 after severe cold rolling | Zahra Hashemi | M.Sc. | Farshidi | 2022-04-04 |
| Investigation of hot deformation parameters of alpha-beta titanium alloy to achieve fine spherical alpha microstructure | mahnaz jafari | P.H.D. | Ebrahimi | 2021-05-30 |
| Synthesis and thin film deposion of Sb2Te3 thermoelectric material using thermal evaporation as layered structure and study of its thermoelectric properties | Fatemeh naderverdy | M.Sc. | Sajjadi | 2021-05-24 |
| Effect of tungsten carbide and stress reliefing process on microstructure and mechanical properties of Stellite cladded layer on SS316L using laser method | mina molaei nadiki | M.Sc. | Beidokhti | 2020-11-30 |
| Effect of shielding gas and laser welding parameters on microstructure and mechanical properties of Stellite cladded SS 316L | Mohadese Hossaini | M.Sc. | Beidokhti | 2020-11-30 |
| Investigation on microstructure and mechanical properties of laser cladded Inconel 625 on directionally solidified nickel superalloy substrate | Mohammadreza Amelzadeh | P.H.D. | Beidokhti | 2021-03-16 |
| The microstructure and mechanical properties of light weight thin wall gray cast irons containing aluminum and silicon | Anahita Reshvani | M.Sc. | Kiani Rashid | 2021-10-11 |
| Solution combustion synthesis of CuO/MnO2 mixed oxide : the effect of processing parameters on the final properties | Laya Agah | M.Sc. | Mollazadeh Beidokhti | 2021-10-11 |
| Investigation of Microstructure and Mechanical properties of Ti-xMo-yAg Implant produced by SPS method | Zahra Ghorbani Safdarabadi | M.Sc. | Babakhani | 2022-01-24 |
| Effect of friction stir processing and plasma electrolytic oxidation on wear and corrosion resistance of commercial pure titanium | Zeinab Askarabadi | M.Sc. | Mohammadi Zahrani | 2022-05-23 |
| Corrosion behavior of similar and dissimilar Corten A welded steel sheets by Shielded Metal Arc Welding and Gas-Metal Arc Welding with CO2 gas | Mohammad Safari | M.Sc. | Mohammadi Zahrani | 2022-01-03 |
| Simulation of the effect of die geometry on the strain distribution imposed by tube channel extruison using finite element method | Mousa Hatami | M.Sc. | Farshidi | 2022-04-04 |
| Microstructure and corrosion resistance of WE43 magnesium alloy after casting and extrude | Mohammadreza Tajari | M.Sc. | Mohammadi Zahrani | 2022-04-18 |
| Combustion synthesis on CuO2 / ZnO / MnO2 ternary metal oxides | Alireza Bijani Aval | M.Sc. | Vahdati Khaki | 2021-10-11 |
| The effect of hot working on bainitic phase transformation of high strength low alloy steel | Sajjad Monem Lushab | M.Sc. | Kiani Rashid | 2022-06-27 |
| Investigating the dissolution process of chalcopyrite in deep eutectic solvents | seyed mojtaba ghadamgahi | P.H.D. | Babakhani | 2022-09-21 |
| INVESTIGATION OF FATIQUE BEHAVIOR OF EPOXY/ CARBON FIBER COMPOSITE using wind turbin blades | Afsane Hosseinzade | M.Sc. | Sahebian | 2022-04-18 |
| Synthesis of Phosphide Compounds on Co-S Nanowires for Use in Hydrogen Production and Supercapacitor | Ehsan Allahyari | P.H.D. | Barati Darband | 2022-08-29 |
| Fabrication of irregular and FGM aluminum open cell foams and investigation of erosion resistance and sound absorption behavior in the presence of gas-solid two-phase fluid | Akram Salehi | P.H.D. | Kiani Rashid | 2022-09-11 |
| Synthesis and characterization and corrosion behavior evaluation of plasma-electrolytic oxidation coating containing alendronate sodium on titanium substrate | Hosein Alizadeh | M.Sc. | Mohammadi Zahrani | 2022-10-24 |
| Corrosion and wear resistance of Titanium-Forsterite composite coating synthesized on Titanium alloy via friction stir processing | Fatemeh Sedaghat | M.Sc. | Mohammadi Zahrani | 2023-01-23 |
| Investigating the effect of superhydrophobic surfaces synthesis route on the corrosion resistance of Titanium alloy | Mahdi Nasiri Kalatebali | M.Sc. | Mohammadi Zahrani | 2023-01-23 |
| Corrosion behavior of magnesium alloy by hybrid LDH/PEO coating in the plasma-electrolytic oxidation process | Neda Nikbin | M.Sc. | Mohammadi Zahrani | 2023-01-30 |
| The effect of high entropy alloy particles on the mechanical behavior of aluminum matrix composites produced by accumulative roll bonding method | mahdi hamounpeyma | P.H.D. | Haddad Sabzevar | 2023-02-20 |
| Investigation of the microstructure and corrosion resistance of laser cladded 2507 supper Duplex Steel coating on 4130 low alloy steel . | Ali Jafarimoghaddam | P.H.D. | Babakhani | 2023-02-21 |
| Fabrication of High Density Poly Ethylen/carbon Black/Magnetite Composite with Segregated Structure and Investigation of its electrical Conductivity and Electro-Magnetic Shielding properties | FATEMEH NAJARNIA | P.H.D. | Vahdati Khaki | 2023-02-20 |
| In-situ Fabrication of Borate Glass/Hydroxyapatite Nanocomposites by Bio-Chemical and Bio-mechanical Characterization | Neda Sami | M.Sc. | Mollazadeh Beidokhti | 2023-01-30 |
| effect of synthesis parameters on optical properties of ZnTiO3 and MnTiO3 perovskite nanocomposite synthesis by solution combustion | Mohaddeseh Shahla | M.Sc. | Mollazadeh Beidokhti | 2023-01-30 |
| Investigation of microstructure and fractional softening in multi-stage hot deformation of micro-alloyed steel containing vanadium-nitrogen | Milad Ehsanzadeh | M.Sc. | Ebrahimi | 2023-01-30 |
| Electrochemical synthesis of Co-Mn-LDH on Co-Se nanostructure for accelerating the overall urea oxidation reaction. | Mohadeseh Afsharpour | M.Sc. | Barati Darband | 2022-10-24 |
| Investigation on surface modification of current collector in lithium-ion batteries | Reza Mostaani | M.Sc. | Beidokhti | 2023-03-13 |
| Electrochemical synthesize of Co-Mn-Ni on Ni nano-micro cones and application in hydrogen production | Seyed Mostafa Nazemi | M.Sc. | Barati Darband | 2022-03-14 |
| Pulse reverse electrodeposition of Co-Fe-S on Ni-Co ad catalyst for electrochemical hydrogen production | Sajjad Satkin | M.Sc. | Barati Darband | 2022-03-14 |
| The effect of alloy elements and thermomechanical history on phase transformation and mechanical properties of x70 steel | Seyed Kamyab Zolnori | M.Sc. | Rezaee Bazzaz | 2023-01-30 |
| The effect of hot deformation parameters on the microstructural evolution of x70 steel | Mahdiyeh Asadi | M.Sc. | Ebrahimi | 2021-11-22 |
| electrodeposition of gradient nanocomposite coating of nickel-tungsten alloy reinforced with alumina and MoS2 particles and investigation of wear and corrosion properties | Hamed Soleymani | P.H.D. | Babakhani | 2023-09-26 |
| An investigation on the microstructure and texture evolutions of the commercially pure titanium grade 2 during equal channel angular pressing and subsequent annealing | Rezvan Saeidi Rashkoliaei | M.Sc. | Farshidi | 2023-07-24 |
| Electrodeposition of hierarchical nickel-copper-iron coating on plain carbon steel substrate and study of hydrophobicity and corrosion behavior | Firoozeh Pourmahdi | M.Sc. | Mohammadi Zahrani | 2023-10-30 |
| Effect of Mg addition on the corrosion resistance of hot-dip galvanized Zn-Al coating on carbon steel | Mohammad Mahdi Hadian | M.Sc. | Babakhani | 2023-11-27 |
| Investigation on microstructure and wear resistance of high entropy alloy cladding layer on carbon steel substrate using welding process | Mahdi Sharifi | M.Sc. | Beidokhti | 2023-11-27 |
| Effect of hot rolling parameters on microstructure and mechanical properties of the X70 micro alloys steel | Seyede Hosna Ghafarikia | M.Sc. | Ebrahimi | 2022-12-12 |
| The effect of quenching and partitioning heat treatment on the microstructure of Carbide-free bainite in medium carbon steels | Iman Ghayour Hallaj | M.Sc. | Ebrahimi | 2023-01-23 |
| The effect of graphene addition to Bi0.5Sb1.5Te3 and Bi2Te2.7Se0.3 in order to improve thermoelectric properties | Fatemeh Rahmani | M.Sc. | Sajjadi | 2023-11-27 |
| The effect of anodizing treatment on the corrosion behavior of AZ91-SiC composite prepared by semi-solid casting method | Sepehr Saffaran | M.Sc. | Mohammadi Zahrani | 2023-12-18 |
| Investigating the performance of nanocomposite with silicon rubber base and carbon nanotube reinforcement with the presence of phase change materials in soft actuators | Mahboubeh Ghasemzadeh Namaghi | M.Sc. | Sahebian | 2023-11-27 |
| The effect of laser welding variables on the microstructure of the overlaps joint of thick plates of austenitic stainless steel and low carbon steel | Mohamad Golgoli | M.Sc. | Kiani Rashid | 2023-12-18 |
| Electrodeposition of nano-structured composite of WO3-CNT for using in supercapacitors | Mahdiye Jahani | M.Sc. | Mirjalili | 2023-12-18 |
| Effect of sinter parameters and heat treatment on mechanical behavior tungsten alloy | Ali Harimi | M.Sc. | Ebrahimi | 2024-01-08 |
| Effect of wobble laser modes on recrystallization of hydroxyapatite on Ti-6Al-4V substrate in simulated body fluid | Neda Hadian Kaffash | M.Sc. | Beidokhti | 2023-12-18 |
| The effects of thermal annealing on the crystallization and mechanical behaviors of additive manufactured Polylactic acid -PLA- based on the 3D-printing parameters | Seyed Mohammad Reza Maydanshahi | M.Sc. | Beidokhti | 2023-11-27 |
| Investigation on microstructure and corrosion resistance of Inconel 625 laser cladded layer on 304L substrate | Zeynab Abbaszadeh | M.Sc. | Beidokhti | 2023-03-13 |
| Investigation on microstructure and mechanical properties of Ni-Ti 2-layered coating on stainless steel substrate using welding process | Massoumeh Montakhab | M.Sc. | Beidokhti | 2023-05-01 |
| Investigating electromagnetic wave absorption -shielding- and mechanical properties of polystyrene/carbon nanotube/nickel segregate composites prepared by latex method | Mostafa Mahdavi | M.Sc. | Sahebian | 2024-01-08 |
| Effect of process parameters on microstructure and solidification morphology of Stellite during laser additive manufacturing | Alireza Zarifiyan | M.Sc. | Beidokhti | 2023-12-18 |
| The effect of Deformation parameters and Heat Treatment on Microstructure and mechanical properties of Tungsten Heavy Alloy | Saleh Karimi Takalou | M.Sc. | Ebrahimi | 2024-02-19 |
| regeneration of used new generation lithium batteries LiNixFeyAlzO2 -NFA- using solution combustion synthesis -SCS- method | Sajad Moatar | M.Sc. | Vahdati Khaki | 2024-03-11 |
| mechanical and chemical properties of Ti-4Al-5V/Ti/BG FGM synthesized by SPS method | Alireza Sharifi | M.Sc. | Vahdati Khaki | 2023-01-30 |
