| Thesis Title | Student | Section | Supervisor | Defence Date |
|---|---|---|---|---|
| Section | Supervisor | |||
| An Investigation on Galvanic Corrosion of Ni containing aluminium bronze welded by TIG | behnam sabbaghzadeh | M.Sc. | Moayed | 2011-09-19 |
| A study effect of fluxe quality on energy Consumption in electric arc furnace | meisam lotfi | M.Sc. | Zabett | 2012-04-17 |
| Carbides spherodization in ultra high carbon steels with fine ferritic grains | Mahdi Muhammadpour | M.Sc. | Kiani Rashid | 2012-07-08 |
| Investigation on the effect of hot rolling with heat treatment on the microstructure and mechanical properties of AZ91 magnesium alloy | Mahmoud Reza Ghandehari Ferdowsi | M.Sc. | Mazinani | 2012-09-19 |
| Recovery of Zinc and Manganese Dioxide from Spent Alkaline Batteries through Hdrometallurgical proccesing | HOSSEIN SHALCHIAN | M.Sc. | Vahdati Khaki | 2012-09-21 |
| Recovery of Iron from low grade iron ore through coal based direct reduction followed by magnetic separation | Naghdali Alavi fard | M.Sc. | Vahdati Khaki | 2012-09-22 |
| Investigation on the influence of quality and quantity of carbon materials on power consumption in elctric arc furnace of Khorasan Steel Industrial Complex | AMIR SHAHPASANDI | M.Sc. | Zabett | 2012-09-22 |
| Improved Bainitic microstructures production in ultra high carbon steels | mojtaba kooshkbaghi | M.Sc. | Kiani Rashid | 2012-09-24 |
| Application of Nano-coating on Al using Friction Stir Pressing (FSP) | Nasrollah Kiajamali | M.Sc. | Sajjadi | 2012-10-02 |
| Study of creep behavior of notched specimens in Ni-base superalloy IN738LC | masood eslami masroor | M.Sc. | Sajjadi | 2012-10-03 |
| Effects of Sintering and Impurities on Kinetics of Reduction of Hematite with volatiles of Coal | Hossein Yavari Mehrabani | M.Sc. | Vahdati Khaki | 2012-10-06 |
| Cold and warm plastic deformation effect and subsequent aging treatment on corrosion properties of 17-4 PH stainless steel in chloride containig solution | Davood Nakhaie | M.Sc. | Moayed | 2012-10-06 |
| Study of kinetic of gama prime particle coarsening in IN792 Ni-base superalloy | atikeh kazemi | M.Sc. | Sajjadi | 2012-10-06 |
| Feasibility Study of mechanochemical synthesis of nanostructured molybdenum carbide using MoS2/CaO/C system in the presence of metallic aluminum | nasrin fekri | M.Sc. | Vahdati Khaki | 2012-11-07 |
| Production of an ultrafine grain copper using MAF | YusufAli Negahdari | M.Sc. | Rezaee Bazzaz | 2012-11-21 |
| Mechanochemical Synthesis of Nanostructured WC in the presence of Alkali Salts using WO3/Zn/C System | fatemeh babania bazgiri | M.Sc. | Vahdati Khaki | 2013-01-22 |
| The effect of / ratio on critical pitting temperature (CPT) of 2205 stainless steel | MASOUMEH NAGHIZADEH | M.Sc. | Moayed | 2013-02-02 |
| Surface modification of nano particles in order to increasing dispersion uniformity in polymer coatings | Pardis Khalilnezhad | M.Sc. | Sajjadi | 2013-02-03 |
| Metal/Oxide nanocomposite thin film on metallic substrates through solution combustion synthesis | Ehsan Mohammadi | M.Sc. | Vahdati Khaki | 2013-02-03 |
| Investigation on the sheet deformation behaviour using Eddy Current technique | mostafa seyfpour | M.Sc. | Kashefi Torbati | 2013-02-03 |
| The effect addition of NO3- in chloride containing solution on critical pitting temperature (CPT) of 2205 stainless steel | Masoud Zakeri | M.Sc. | Moayed | 2013-02-03 |
| Fabrication of Magnetic Nanofluid using Synthesized Nano Fe3O4 Powder | Faridreza Attarzadeh | M.Sc. | Kashefi Torbati | 2013-02-03 |
| Pitting corrosion of 17-4 PH stainless steel in S2O3 aquaus environment | mozhgan abooei mehrizy | M.Sc. | Moayed | 2013-02-03 |
| Preparation and chracterisation of dye-sensitized solar cells using TiO2 nano-powder | fereshteh momeni | M.Sc. | Kashefi Torbati | 2013-02-03 |
| An investigation on the effect of nano agent on micro structure and mechanical properties of aluminum foam | akram salehi | M.Sc. | Babakhani | 2013-03-06 |
| Production of Nanocrystalline Stainless Steel by a Multi-stage Thermomechanical Process | Roohallah Surki Aliabad | M.Sc. | Mazinani | 2013-03-10 |
| FGM Fabrication of Al/Al2O3 Nano-composite and investigation on their microstructure and fracture toughness | mohammad reza keshmiri | M.Sc. | Sajjadi | 2013-03-13 |
| Coating of Metallic Substrates via Combustion synthesis Reaction | Saeed Mohammadkhani | M.Sc. | Vahdati Khaki | 2013-05-15 |
| Synthesis of nanocomposite by means of ball milling stainless steel X20Cr13 scales with Al powder | SAEED BONDAR | M.Sc. | Zabett | 2013-07-01 |
| The study of influence of solidification cooling rate on heat treatment cycle of unalloyed malleable cast iron production | javad helali fard | M.Sc. | Kiani Rashid | 2013-09-21 |
| Fracture behavior investigation on tin matrix composite with alumina nano particle reinforcement use of essential work of fracture | hossein hamedi | M.Sc. | Zebarjad | 2013-09-21 |
| The effect of S-2 and S2O3-2 on critical pitting temperature of 2205 stainless steel | Ali Kosari | M.Sc. | Moayed | 2013-09-21 |
| Recovery of Valuable Metallic components from Spent Chargable Lithium Batteries | Ali Rafsanjani | M.Sc. | Vahdati Khaki | 2013-09-26 |
| A study on strengthening mechanism of Tin matrix nanocomposite reinforced by SiC nanoparticles | Hamid Reza Erfanian Nazif Toosi | M.Sc. | Zebarjad | 2013-09-26 |
| influance evaluation of nano SiC particles on Aluminum matrix foam strengthing | marziye momeniyan | M.Sc. | Zebarjad | 2013-09-26 |
| Study of superplastic like deformation of a Zr based bulk metallic glass using impression creep technique | Morteza Adineh | M.Sc. | Rezaee Bazzaz | 2013-10-07 |
| wear resistant cotings on steel substrate with reactive cored electrode via welidng techniques | Mohammad Pirnia | M.Sc. | Vahdati Khaki | 2013-12-22 |
| the effect of grain size and morphology on the microsegregation of Al alloys | mehdi dehnavi | M.Sc. | Haddad Sabzevar | 2013-12-25 |
| Fabrication of CNTs using mechanical milling in the presence of an exothermic reaction | ebrahim zohour vahid karimi | PhD | Vahdati Khaki | 2014-01-06 |
| Mechanochemical synthesis of aluminum nitride by milling melamine and its derivatives with aluminum and studding the thermal stability of the products | Seyyed Amin Rounaghi | PhD | Kiani Rashid | 2014-01-07 |
| Introducing new technique for critical pitting temperature measurment based on impedance spectroscopy in 10% ferric chlrode solution | Mehrdad Zia Hoseinpoor | M.Sc. | Moayed | 2014-01-12 |
| Effect of type and amount of additives on reducibility of iron ore pellet using coal volatiles as reductant | Hossein Azad Jabelloo | M.Sc. | Vahdati Khaki | 2014-01-25 |
| Effect of microalloying on the microstructure and hot working behavior of Mg-6Al-1Zn-RE alloys | atefe negahban boron | M.Sc. | Ebrahimi | 2014-01-25 |
| Effect of rheocasting and thixoforming on microstructure and mechanical properties of Al 2024 | Behnam Rahimimonjezi | M.Sc. | Haddad Sabzevar | 2014-01-26 |
| Improving corrosion resistance of cadmium plated steel by non-chromate convesrion coating | amene abbasi aghuy | M.Sc. | Moayed | 2014-01-29 |
| monitoring microstructural changes in spherodizing process using Magnetic Barkhausen Noise (MBN) analysis | faeezh jarrahi | M.Sc. | Kashefi Torbati | 2014-02-01 |
| Effect of Sr and Ca on hot deformation behavior of Mg-8Al- X%Ca/X%Sr alloy | fatemeh marzangooshi | M.Sc. | Ebrahimi | 2014-02-01 |
| Pitting corrosion investigation of 17-4 PH stainless steel in chloride containing thiosulphate solution | malihe ebrahimzadeh | M.Sc. | Moayed | 2014-02-02 |
| An Investigation the micro structure and mechanical properties of Al-CNT composite particles produced by SPS method | davoud khademi | M.Sc. | Babakhani | 2014-02-04 |
| Detection and measurment of corrosion in tubes by the eddy current method | MILAD HOJATI | M.Sc. | Kashefi Torbati | 2014-02-08 |
| Oxidation resistant inhancment of CK45 at elevated temperatures | Hamed Danesh Ahmadi | M.Sc. | Kiani Rashid | 2014-02-08 |
| Formation of Nano coating on Al plate by LASER clading | hamed parvaneh | M.Sc. | Sajjadi | 2014-02-09 |
| Effect of rare earth additions on microstructure and hot deformation behavior of Mg-Al-Zn alloy | mahzad zohoori tali | M.Sc. | Ebrahimi | 2014-02-09 |
| Formation of Multi-Layer structure of Al-Al2O3 by accumulative Roll-bonding | saeed biabangard barani | M.Sc. | Sajjadi | 2014-02-10 |
| An invetigation on synergistic effect of zinc phosphate pigment and organuic inhibitor in an organic coating based on polyester | ziba mirzakhanzadeh | M.Sc. | Moayed | 2014-02-10 |
| An investigation on the mechanism of organic inhibitor adsorption on cold deformed mild steel | Faeze Barzegar | M.Sc. | Moayed | 2014-02-10 |
| Formation of Ni- SiC-Al2O3 cermet using ceramic particles coated by Ni | danial firouzbakht | M.Sc. | Sajjadi | 2014-02-10 |
| Mechanochemical Purification of Molybenum trioxide | navid bondar | M.Sc. | Vahdati Khaki | 2014-02-10 |
| detection of hidden corrosion in multilayerd structures using pulsed eddy current technique | Sadegh Moslemi Mehni | M.Sc. | Kashefi Torbati | 2014-02-10 |
| An investigation of the mechanism of metastable pit occurence on 2205 SS at temperature below and above its crtitical pitting temperature | mahboobe gholami | M.Sc. | Moayed | 2014-02-15 |
| Strenghening of weld zone via in situ synthesis of hard phases through FSSW process | shahab e ddin shahsavar fard | M.Sc. | Vahdati Khaki | 2014-02-16 |
| The role of thin metallic coverage on cast iron formability improvments | seyed Kamran Kaboli Mallak | M.Sc. | Kiani Rashid | 2014-02-16 |
| effect of mechanical deformation on the thermal stability of cobalt-based amorphous alloy | Peyman Niazi Razavi | M.Sc. | Haddad Sabzevar | 2014-03-12 |
| Investigation of physical, mechanical and structure of Nano-Composite foam of Cu/Cr2O3 | MINA SABZEVARI | M.Sc. | Sajjadi | 2014-03-13 |
| optimization of chemical composition for producing pellet with proper reducibility in Golgohar Co of Sirjan via Taghuchi method | hadi mahmodabadi | M.Sc. | Vahdati Khaki | 2014-05-17 |
| Mechanochemical synthesis of nanostructured tungsten compounds from ammonium paratungstate (APT) | Maryam Sadat Marashi | PhD | Vahdati Khaki | 2014-05-31 |
| Production of aluminum alloy with super plastic ability by multi-axial forging | hamid reza ghorbanzadeh | M.Sc. | Rezaee Bazzaz | 2014-06-03 |
| Characterization of hot deformation behavior of Mg-X%Zn alloys by using processing Map | roghaye farazi | M.Sc. | Ebrahimi | 2014-07-06 |
| The effect of cooling rate on the microsegregation of Al-base alloys | Mohammad Hasan Avazkonandeh Gharavol | PhD | Haddad Sabzevar | 2014-07-07 |
| بررسی رفتار تغییرفرم دمای بالا ی نانو کامپوزیت های A6061-Al2O3 تولید شده با فرایند ریخته گری گردابی | Hamidreza Ezatpour | PhD | Sajjadi | 2014-07-26 |
| The study of preferred nucleation sites at short time of isothermal transformations on ferritic and pearlitic formation zones in ductile cast iron with various compositions | Shadi Ramezanzadeh noghondar | M.Sc. | Kiani Rashid | 2014-07-26 |
| synthesis and morphology investigation of FAp/TiO2/CNT doped with antibactrial agent used in Ti-based dental implants | nasrin sasani | PhD | Zebarjad | 2014-09-10 |
| The investigations on elevated temperature oxidation of aluminum castings with steels cores | Minoo Tavakoli | M.Sc. | Kiani Rashid | 2014-09-13 |
| The production of lead-free solder alloys and their physical and mechanical properties compare with the common commercial solders | Alireza Baei | M.Sc. | Kiani Rashid | 2014-09-15 |
| Quantitative evaluation of martensitic transformation in austenitic stainless steels during deformation using non-destructive testing technique | Esmaeel Ahmadzade Beiraki | M.Sc. | Mazinani | 2014-09-16 |
| Non destructive quality control of heat treated aluminium parts using electromagnetic prob | Ali Abbasian | M.Sc. | Kashefi Torbati | 2014-09-20 |
| Production of Light Weight Cast Iron with Nodules of Graphite | Mohammad reza Hassani | M.Sc. | Kiani Rashid | 2014-09-21 |
| Production (fabrication) and investigation mechanical properties of aluminum-graphite particle composite with uniform distribution of particles using mechanical stirring and sps (Spark Plasma Sintering | Hossein Pakdell Noghabi | M.Sc. | Babakhani | 2014-09-21 |
| Pitting corrosion investigation of 17-4 PH stainless steel in different concentration of chloride and passivating inhibitor ions | Mahla Seyedi | M.Sc. | Moayed | 2014-09-22 |
| An investigation on corrosion resistance of ... | Mostafa Mohtashamipour | M.Sc. | Kiani Rashid | 2014-09-22 |
| An investigation on the effect of solution annealing temperature on pitting corrosion of AISI 403 martensitic stainless steel | nooshin banihasan | M.Sc. | Moayed | 2014-09-22 |
| An investigation on the effect of tempering temperature on pitting corrosion of AISI 403 martensitic stainless steel | Iman Taji | M.Sc. | Moayed | 2014-09-22 |
| Production of thin-wall sandwich structure with Composite Nanostructure interface | Mohammad Mahdi Balouchian | M.Sc. | Vahdati Khaki | 2014-09-22 |
| The production of ultra-high-carbon steels by powder metallurgy | omid rostami | M.Sc. | Kiani Rashid | 2014-09-22 |
| Fabrication of Ferromolybdenum using molybdenite concentrate through combustion synthesis in the presence of aluminum and lime | Morteza Mirjalili | M.Sc. | Vahdati Khaki | 2014-09-22 |
| Fabrication of ZnO nanorod throuhgh Hydrothermal route | KHATEREH EDALATI | M.Sc. | Vahdati Khaki | 2014-09-22 |
| Mechanochemical synthesis of nanostructured W/Al2O3 composite powder | Mehrdad Malekei far | M.Sc. | Vahdati Khaki | 2014-09-22 |
| synthesis of thermo-electric material by mechanical alloying | MOHAMMAD REZA BAGHAEI | M.Sc. | Vahdati Khaki | 2014-09-22 |
| Mechanochemical leaching of copper sulphide concentrate in sulphuric acid | Farhad KhorramshahiMohammadAbad | M.Sc. | Vahdati Khaki | 2014-09-22 |
| Fabrication of nano structured Al2O3/Fe composite....... | mohamad sarbazvatan | M.Sc. | Vahdati Khaki | 2014-10-20 |
| Surface preparation of SiC nano-particles and fabrication of Al/SiCp Gradiant nanocomposite (FGM) | mohammad ali haghi | M.Sc. | Sajjadi | 2014-11-22 |
| Simulation of tensile behavior of ferritic-pearlitic steels using micromechanical equations | fereshteh alamy | M.Sc. | Rezaee Bazzaz | 2014-11-30 |
| in situ measurment of corrosion of low carbon steel using electrochemical and eddy current techniques | Reza Johari Teymoori | M.Sc. | Kashefi Torbati | 2015-01-05 |
| Effect of welding parameters on the mechanical properties of titanium alloy weld metals | Kamyar Abbasi | M.Sc. | Sajjadi | 2015-01-19 |
| Fatigue behavior investigation of GRP composites produced by hand lay Up and VIP methods | mehran toghraee | M.Sc. | Zabett | 2015-01-19 |
| synthesis of functionally graded pourou coatings on Ti-based dental implants surface through sol-gel | Vahideh Sadat Ebrahimi | M.Sc. | Vahdati Khaki | 2015-01-28 |
| Finding a correlation between metastable pitting frequency and bicarbonate ion concentration on pitting corrosion of 17-4 PH stainless steel | Golnaz Tehranchi | M.Sc. | Moayed | 2015-01-28 |
| investigation on magnetic behaviour of plain carbon steel as a function of applied stress using barkhausen noise | parisa moinpour | M.Sc. | Kashefi Torbati | 2015-01-28 |
| Evaluation of internal stress field in dual-phase steels with different microstructures using non-destructive testing | Edris Khorashadizadeh | M.Sc. | Mazinani | 2015-01-28 |
| manufacturing of Nanocomposite Ti/TiC Foam by powder metallurgy using Titanium hydride and investigation of its microstructure and mecanical properties | ensiye edalati khodabandeh | M.Sc. | Sajjadi | 2015-01-28 |
| Study of the effects of manufacturing parameters on the microstructure and mechanical properties of Ti-composites reinforced by titanium boride and carbide | Saeid GHESMATITABRIZI | PhD | Sajjadi | 2015-03-08 |
| Mechanochemical Coating of steel substrate by TiC through mechanically induced self-propagating reaction (MSR) | elmira kabiri balajadeh | M.Sc. | Vahdati Khaki | 2015-03-14 |
| Application of nondestructive eddy current teqnique to detect and evaluate sentisation and intergarnular corrosion in austenitic stainless steel | yegane kelidari | M.Sc. | Kashefi Torbati | 2015-04-21 |
| Fabrication of Ceramic/Metall composites through slip casting | sima mollaei | M.Sc. | Vahdati Khaki | 2015-05-25 |
| The role of volailes in direct reduction of iron oxides by coal | Hossein Hemmati | PhD | Vahdati Khaki | 2015-06-07 |
| synthesis of nanostructure composite of NiAl/Al2O3 via combustion synthesis and evaluation of thermal properties | Maryam Beyhaghi | PhD | Kiani Rashid | 2015-06-08 |
| The effect of crevice geometry on crevice corrosion of 316L Stainless Steel | elahe shojaee | M.Sc. | Moayed | 2015-06-27 |
| The influence of mild steel grain size on an ingornaic corrosion inhibitor adsorption mechnism in acidic media | majid bakhshi | M.Sc. | Moayed | 2015-06-28 |
| Production of dual-phase steel with fine martensite islands by multi-axial forging (MAF) | hassan najafi | M.Sc. | Mazinani | 2015-06-30 |
| Formation of nanocomposite layer containing SiC on steel using FSP | Mostafa Fotoohi nezhad khales | M.Sc. | Sajjadi | 2015-07-11 |
| Spheroidization of cementite in a plain carbon steel with severe deformation in multi-axial forging (MAF) | hamid reza baleshabadi | M.Sc. | Mazinani | 2015-07-13 |
| manufacturing of Nanocomposite Al/Al2O3 Foam by powder metallurgy using Titanium hydride, Zirconium hydride and Calcium carbonate and investigation of its microstructure and mecanical properties | Farzaneh Vahidi Mayamey | M.Sc. | Sajjadi | 2015-07-15 |
| investigation of alloy elements effect on weld ability of Cu-Al C95700UNS | mohammadreza mirzadeh rahni | M.Sc. | Haddad Sabzevar | 2015-09-15 |
| Investigation and Simulation the Micromechanical Fracture of Reinforcement Particles in Composites | seyed morteza kobari ghotbi | M.Sc. | Mazinani | 2015-09-19 |
| Effects of surface modification of Carbon nano tube on the mechanical properties of Al/CNT nanocomposite | mahsa nazeran | M.Sc. | Sajjadi | 2015-09-22 |
| detection of carburized depth in steel using nondestructive electromagnetic teqnique | Sara Falahat | M.Sc. | Kashefi Torbati | 2015-09-22 |
| Tribological Behavior Investigations of Nano- crystalline and Amorphous Co-Ni Coatings | mohammad ghasemi | M.Sc. | Kiani Rashid | 2015-10-25 |
| An investigation and modelling of energy absorption in sandwich panels with closed cell aluminum foam core | masoud golestanipour | PhD | Babakhani | 2015-10-28 |
| Feasibility study of steel production via decarburization of pig iron thin sheets | fazlollah zamanian | M.Sc. | Vahdati Khaki | 2015-11-18 |
| Fabrication of Fe-TiC-Al2O3 composite on surface of steel via combination of combustion synthesis and GTAW Processes | Mahmood Sharifitabar | PhD | Vahdati Khaki | 2015-12-01 |
| Parametric Study on Fabrication of Sponge Iron Through Coal-based Hoganas Process | morteza mokhtari | M.Sc. | Vahdati Khaki | 2015-12-20 |
| Investigation of microstructure, physical and mechanical properties of Nano-Hard Metals produced using Spark-Plasma Sintering (SPS) | seyedeh elnaz afkhami | M.Sc. | Sajjadi | 2016-01-03 |
| Microstructure Nondestructive Chracterization of H13 Tool Steel Using Eddy Current and Barkhausen Techniques | Saeid Kahrobaee | PhD | Kashefi Torbati | 2016-01-14 |
| The effect of Friction stir welding parameters on microstructure and mechanical properties of dissimilar metal joints (aluminum/steel) | navid arabnezhad | M.Sc. | Haddad Sabzevar | 2016-01-17 |
| Effects of sintering parameters on microstructure and mechanical properties of Co-Al2O3-TiO2 cermets produced using SPS | azar esmaeilzaei | M.Sc. | Sajjadi | 2016-01-19 |
| Indentation Creep behaviour of AZ Magnesium Alloy with RE Elements | simin hatami | M.Sc. | Mazinani | 2016-01-20 |
| تاثیر مدت زمان ایجینگ دمای 550 درجه سانتیگراد بر رفتار خوردگی حفره ای فولاد زنگ نزن رسوب سخت شونده 17-4 پی اچ کار سرد شده | reza panbehkar | M.Sc. | Moayed | 2016-01-20 |
| production of 304L austenitic stainless steel with bimodal grain structure through cold rolling and subsequent annealing process | Tahmine Ghaderi | M.Sc. | Mazinani | 2016-01-27 |
| size and stability control of magnetic دnanoparticles for biological application | mohammad rezaie | M.Sc. | Kashefi Torbati | 2016-01-27 |
| Effect of content, size and distribution of porosity on the microstructure and compression behavior of cast iron foam | Hamid Sazegaran | PhD | Kiani Rashid | 2016-02-03 |
| Effect of Bonding Parameters on Microstructure and Mechanical Properties of Transient Liquid Phase (TLP) Bonding of Nickel-Based GTD111 and Cobalt-Based FSX414 Superalloys | Sepide Hadibeik Neishaboori | M.Sc. | Beidokhti | 2016-03-14 |
| Phase Transformation Characterization and Strength Determination of Transient Liquid Phase (TLP) in Cu-Sn System | behnam hosseinzaei | M.Sc. | Kiani Rashid | 2016-04-18 |
| The effect of Friction Stir Welding parameters on microstructure and mechanical properties of dissimilar metal joints (Aluminium-Titanium) | Ali Mellatkhah | M.Sc. | Haddad Sabzevar | 2016-07-11 |
| Microstructural evolution of microalloyed steel during deformation and subsequent intercritical annealing treatment | zahra ramezani | M.Sc. | Mazinani | 2016-07-31 |
| Synthsis and Investigation on Production Mechanism of Ni-Al2O3 nanocomposite prepared by Solution Combustion | Hadi Nasiri | PhD | Vahdati Khaki | 2016-09-13 |
| The effect of thermomechanical processes on the shape memory behavior and microstructural evolution of Ti-rich NiTi shape memory alloy | Ghazal Tadayyon | PhD | Zebarjad | 2016-09-14 |
| The effect of FSSW parameters on the microstructure and mechanical properties of aluminum joints | Saeed Rohani Yazdi | M.Sc. | Beidokhti | 2016-09-18 |
| Investigation the effect of grafitization cycle on microstructure and mechanical properties of ... | reza pourreza | M.Sc. | Babakhani | 2016-09-18 |
| Effect of solidification rate of pig iron on the kinetics of decarburization in the solid-state steel making process | Ebrahim Sharif sanavi | M.Sc. | Mirjalili | 2016-09-19 |
| on the structure and thermal stability of weld joint of Ti-based bulk metallic glass welded by Friction stir spot welding | zahra jamilishirvan | PhD | Haddad Sabzevar | 2016-09-21 |
| Effect of Taype and Mouth of Fuel on the NiO-ZnO-〖Fe〗_2 O_3 Ferrite by Solution Combustion Synthesis Method | nafise azizi | M.Sc. | Vahdati Khaki | 2016-10-03 |
| copper extraction from sarcheshme concentrate via .......... | majid rahmani | M.Sc. | Vahdati Khaki | 2016-10-17 |
| Investigation of hardfacing layer on chromium steel using reactive electrode welding | seyed ali seyedmohamadi | M.Sc. | Vahdati Khaki | 2016-10-17 |
| The investigations on influenced parameters in diffusional bounding of ultra high carbon and low carbon steels composites | sima soleimani | M.Sc. | Kiani Rashid | 2016-11-16 |
| Carbothermic Reduction of Electric Arc Furnace Dust in the Presence of Ferrosilicon | seyed mohsen moosavi nejad | PhD | Zabett | 2016-11-19 |
| The Chemical Synthesis of Ferrites Nanoparticles for Targeted Drug Delivery and Magnetic Hyperthermia Simultaneously Applications, and the Evaluation of their Magnetic and biocompatibility Properties | Mohammad Reza Ghazanfari | PhD | Kashefi Torbati | 2016-12-04 |
| Pure calcium molibdate production from Sarcheshme molibdenite concentrate using pyro-hydro-metallurgy | ALI FAROKHI | M.Sc. | Vahdati Khaki | 2016-12-27 |
| Fabrication of functional graded 3Y-PSZ/316L materials and investigation the mechanical and microstructural properties of composites | Emad Jajarmi | PhD | Sajjadi | 2017-01-22 |
| High Oxidation Temperature Behavior of Ultra High Cabon Steels in Compare with Low Carbon Steels | Majid Shah Sanaei | M.Sc. | Kiani Rashid | 2017-01-31 |
| Applying gradient thermal barrier coatings on IN738 superalloy and investigation of Oxidation Behavior, mechanical properties and microstructure of the coatings at high temperatures | yeganeh hasan zadeh | M.Sc. | Babakhani | 2017-02-12 |
| Effect of iron oxide on the properties of welding cellulose electrodes | gholam reza taghizadeh kamali | M.Sc. | Beidokhti | 2017-02-13 |
| Effect of milling parameters and paste composition on the efficiency of the lead-acid battery plates | hamed soleymani | M.Sc. | Mirjalili | 2017-02-14 |
| The Effect of Chloride, Bromide and Iodide Anions on the Pit Chemistry and its Correlation with the Pitting Potential of 316 Austenitic Stainless Steel | Sohrab Pahlavan | M.Sc. | Moayed | 2017-02-15 |
| Perparation of apatite glass-ceramic coating on Ti6Al4V substrate by sol-gel method | sara shoorvazi | M.Sc. | Kiani Rashid | 2017-02-18 |
| Investigation of Elemental Sulfur Corrosion on Milde Steel in Chloride Containing Solution | asieh erfanian sobatkhani | M.Sc. | Moayed | 2017-02-18 |
| An investigating into the aging behavior of Pb-Ca-Sn alloys | davood afshar bahrabab | M.Sc. | Mazinani | 2017-02-18 |
| stablizing magnetic nanofluids for biological application | mozhgan mousakhani | M.Sc. | Kashefi Torbati | 2017-03-01 |
| An investigation on adsorption mechanism of organic corrosion inhibitor on mild steel in acidic environment under influence of electrolyte impingement | mohsen mohammadian | M.Sc. | Moayed | 2017-03-06 |
| Investigation of surface modification mechanism over microstructure and mechanical properties of Al/CNT composites produced through spark plasma sintering (SPS) method and evaluation of their characteristics | Farhad Saba | PhD | Sajjadi | 2017-05-22 |
| Evaluation of the Deformation Behavior of Dual-Phase Steel with Various Size of Strengthening Particles Using a Microstructure-Based Model | meymanat sadat mohsenzadeh | PhD | Mazinani | 2017-07-04 |
| Investigation of microstructure and mechanical properties of GTD-111 nickel based superalloy bonded by transient liquid phase (TLP) process | danesh amiri | M.Sc. | Sajjadi | 2017-08-28 |
| Study of Electromagnetic interference shielding effectiveness of Epoxy/Carbon Nano tubes Composites reinforcement with Finemet Amorphous Alloy | soheil jamali | M.Sc. | Haddad Sabzevar | 2017-09-13 |
| The effect of chemical component on mechanical behavior of dental composites | zahra kahrobaee | M.Sc. | Mazinani | 2017-09-17 |
| Single step synthesis of Cu/ZnO powder mixture via solution combustion synthesis | seyed mohammad mahdi seyedalizade zahmatkesh | M.Sc. | Vahdati Khaki | 2017-09-17 |
| Synthesis of Co(1-X)Ni(X)Fe2O4 Nanoparticles by microemulsion route and investigation of effect of size, morphology and composition on magnetic properties | farnaz ebrahimi | M.Sc. | Sajjadi | 2017-09-18 |
| Relationship between transition potential and pitting potential on a 2205 duplex stainless steel at the presence of molybdate using pencil electrode | Razieh Tavassolian | M.Sc. | Moayed | 2017-09-19 |
| Microstructure investigation and the mechanical properties of Cu/Ni3Al-Al2O3 composite produced by mechanical alloying, sintering and hot pressing | sadegh dareyni | M.Sc. | Babakhani | 2017-09-19 |
| (Investigation of the residual strength in Glass fiber reinforced Polymeric composite manufactured by vacuum infusion process (V | mojtaba esfidani | M.Sc. | Zabett | 2017-09-20 |
| Effect of gradient structureon the microstructural characteristics and mechanical properties of WC-Co nano hardmetal fabricated using spark plasma sintering method (SPS) | Seyed Ehsan Ghoreyshi | M.Sc. | Sajjadi | 2017-09-20 |
| Investigation on the effect of molybdate ion on critical pitting temperature of AISI 316 stainless steels with study on its effect on chemical composition of pit solution using pencil electrode | Mahbobeh Panezhad | M.Sc. | Moayed | 2017-09-20 |
| the effect of Si on the growth kinetics of intermetallic layer in hot-dipped aluminide processing of mild steels | mojtaba jafari | M.Sc. | Vahdati Khaki | 2017-09-20 |
| Comparison of fatigue behavior of polyester/glass fiber composite and epoxy/glass fiber composite | ali bakaeian | M.Sc. | Zabett | 2017-09-20 |
| Investigating of the effects of micro-nano alumina reinforcing particles on mechanical properties and microstructure of Al/Mg layered composite | Maryam Abbasi | PhD | Sajjadi | 2017-09-23 |
| Study of the effects of glass fibre surface treatment on mechanical properties of epoxy matrix composites | Shirin Pourhosseini | M.Sc. | Zabett | 2017-09-25 |
| Investigation on the effect of Molybdate on the Repassivation Potential of ۳۱۶ Ausentic Stainless Steel and its Correlation with the Change the Pit dissolution Resistance | Reyhaneh Zakeralhoseini | M.Sc. | Moayed | 2017-09-27 |
| Investigation of the synchronous effect of microwave radiation and mechanical activation on the dissolution of molybdenite in sulfuric acid | Mohammad Moodi | M.Sc. | Vahdati Khaki | 2017-10-04 |
| Estimated hardening depth for AISI 8620 steel and determination of carbon content in surface using a non-destructive eddy current method | elaheh salar | M.Sc. | Kashefi Torbati | 2017-10-10 |
| Investigating the Effect of Mechanical Activation and Alumina Presence on the Structural Changes and Leaching Kinetics of Sarcheshmeh Molybdenite Concentrate | Hossein Shalchian | PhD | Vahdati Khaki | 2017-12-30 |
| Finite element simulation of mechanical behavior of TRIP800 steels using an advanced microstructure based model | Fereshteh Hosseinabadi | PhD | Mazinani | 2018-01-09 |
| Friction Stir Welding of Aluminum and Magnesium Alloys and Investigation of Microstructure and Mechanical Properties of Bonding | mehdi hamoon payma | M.Sc. | Haddad Sabzevar | 2018-01-13 |
| Preparation of (Cu-Al2O3) Nanocomposite by Hydro Metallurgy Technique and Fabrication by SPS Method | mohammad gordan | M.Sc. | Babakhani | 2018-01-29 |
| Behavior evaluation of high temperature oxidation 304 austenitic stainless steel and 4140 low alloy steel in coupled conditions | Seyyed Rasoul Alavi | M.Sc. | Kiani Rashid | 2018-02-06 |
| Producing 3D images of metallic carbides in the microstructure of cold work tool steel AISI D3 | Vahid Salari | M.Sc. | Kiani Rashid | 2018-02-07 |
| Fabrication and investigation of corrosion behavior of nickel-based super hydrophobic metal surfaces using electrodeposition method | Ehsan Rahimi | M.Sc. | Davoodi | 2018-02-10 |
| Characterization of the morphology and optical properties of ZnO containing pigments synthesized by solution combustion method | hamed kazemi | M.Sc. | Mollazadeh Beidokhti | 2018-02-17 |
| The effect of tool geometry on microstructure and mechanical properties of dissimilar friction stir welding of aluminium and steel | Fazel Alavi | M.Sc. | Beidokhti | 2018-02-17 |
| Production of metallic iron powder by using hematite mineral through Höganäs process and investigation of parameters affecting reduction degree and metallization degree of product | mohammadreza hosseinpour | M.Sc. | Babakhani | 2018-02-17 |
| creep behavior of E-glass/epoxy composite used in wind turbine blade | nadia nosrati | M.Sc. | Zabett | 2018-02-19 |
| Study of Joining Mechanism of Aluminum-Polyethylene Using FSSW | mehrdad mahmoudi | M.Sc. | Beidokhti | 2018-02-19 |
| Study influence liquid rubber additives into resin on the fatigue behavior of fiber glass reinforced polyester Composite for wind turbine blade | mohammad amin mousavi | M.Sc. | Zabett | 2018-04-16 |
| Investigation of superplastic behavior of AA2124 aluminum alloy processed by multi-axial forging by shear punch | Ebrahim Honarpishe laghlagh | M.Sc. | Rezaee Bazzaz | 2018-04-18 |
| Investigation of strain effect on microstructural changes and hardness of ductile cast iron | Jafar Bahadori Fallah | M.Sc. | Kiani Rashid | 2018-05-16 |
| Synthesis and investigation the magnetic and optical hyperthermia features of Co-ferrite nanoparticles surface activated with palladium | Seyyede Fatemeh Shams | PhD | Kashefi Torbati | 2018-06-03 |
| Investigation of Conditions for Creation a Microstructure With Bimodal Grain Size Distribution In AZ31 Magnesium Alloy Under Hot Multiaxial Forging Process (MAF) | mahnaz jafari | M.Sc. | Mazinani | 2018-06-09 |
| Prouduction of brass-alumina nano-structure composite by combustion synthesis technique using ZnO-CuO-Al-C system | hasan marousi | M.Sc. | Vahdati Khaki | 2018-06-11 |
| Strontium carbonate synthesis from celestine by Pyro-hydrometallurgy technique | zahra razaiy | M.Sc. | Vahdati Khaki | 2018-06-20 |
| Effect of microstructure on hydrogen permeation parameters in X70 microalloyed steel | masoomeh tavakolikhorasani | M.Sc. | Moayed | 2018-06-30 |
| The Effect of Chemical Composition of Repair Welding Layers on Microstructure and Hardness of AISI H13 Tool Steel | saeed niktinat | M.Sc. | Beidokhti | 2018-07-08 |
| A comparative study of stress corrosion cracking of X70 and X80 alloys by using the slow strain rate test | Ehsan Allahyari | M.Sc. | Davoodi | 2018-09-17 |
| Synthesis and Surface Modification of PbS Nanoparticles for Fabrication of Quantum Dot Solar Cells | Hossein Beygi Nasrabadi | PhD | Sajjadi | 2018-09-18 |
| AN Investigation IN TO THE Effect OF hot Compression Process AND Subsequent Heat Treatment ON Microstructure AND Flow Behavior OF ZK40 Alloy | Niloufar Kheirkhahan | M.Sc. | Mazinani | 2018-09-22 |
| Fabrication ODS Ni-ZrO2 nanocomposite with electroless nickle coating on zirconia particles by spark plasma sintering (SPS) method and investigation mechanical and microstructure properties | Zahra Fatahi | M.Sc. | Sajjadi | 2018-09-22 |
| In Situ Synthesis of Cu/Fe3O4 Nanocomposite by Mechanochemical Technique | masoumeh barati | M.Sc. | Vahdati Khaki | 2018-09-22 |
| Pitting corrosion of 304 and 403 stainless steels in NaI solution | mohammad zohoorian | M.Sc. | Mirjalili | 2018-09-27 |
| Effect of fuel type and procedure parameters on morophology and chemical composition of solution combustion synthesized magnetite nanopowders | hesam aali | M.Sc. | Mollazadeh Beidokhti | 2018-09-29 |
| Investigation of the dependence of the magnetic-hysteresis loop characteristics in grain size for the non-destructive characterization of the microstructure of steel parts | amirhossein memarzadeh | M.Sc. | Kashefi Torbati | 2018-10-07 |
| An Investigation on the Mechanism and Reaction Sequence of CaWO4-Mg and CaWO4-Mg-C Mixtures during Mechanical Milling | hossein yavari mehrabani | PhD | Babakhani | 2018-10-13 |
| Synthesis of Ag-TiO2-ZnO nanocoating using different processes on fabrics and study of their antibacterial and photocatalytic properties | Mohammad Ansari | M.Sc. | Sajjadi | 2018-10-17 |
| Effects of thickness and micro structural characteristics on thermoelectric properties of Bi2Te3 component (n type) fabricated using mechanical alloying (MA) and spark plasma sintering method (SPS) | Nafise Bolghan abadi | M.Sc. | Sajjadi | 2018-10-22 |
| Direct Fabrication of Ferromolybdenum using Molybdenite (MoS2) via Combustion Synthesis Process (S.H.S) | MH golmakani | PhD | Vahdati Khaki | 2018-10-27 |
| Application of micromagnetic techniques to investigate the temper embrittlement in steel | elahe borhani haji abad | M.Sc. | Kashefi Torbati | 2018-10-27 |
| Effect of Bismuth on the microstructure of cast magnesium alloy AZ | hamid moshaver | M.Sc. | Mazinani | 2018-12-01 |
| Production, heat treatment and mechanical Properties and microstructural Properties of Bronze Aluminum – Alumina Composite (C95800-Al2O3) | shahin jourabchi | M.Sc. | Babakhani | 2018-12-03 |
| Synthesis of ODS nano-composite (Ni-ZrO2) with gradient composition (FGM) by spark plasma sintering and study of corrosion and high temperature oxidation properties | leila momeni kangarshahi | M.Sc. | Sajjadi | 2018-12-05 |
| Investigating the efect of sintering mettod on warm diformationAl/Sicp nanao composit. | fatemeh barzan | M.Sc. | Babakhani | 2018-12-11 |
| High Temperature Oxidation of 321 Austenitic Stainless Steel with an Ultrafine-grained Surface | Sadegh PourAli | PhD | Kiani Rashid | 2018-12-13 |
| Optimizing the mechanical properties of SAPH440 dual phase steel using Taguchi robust design method | behnaz zibaee | M.Sc. | Kamyabi-Gol | 2018-12-15 |
| The Investigations on Ultra High Carbon Steel Graphitization for Obtaining Optimal Microstructure and Improvement in Mechanical Properties | najmeh hosseini | M.Sc. | Kiani Rashid | 2018-12-17 |
| Study of adding different amounts of nuclei in crystallization process and growth in Alumino silicate glass | najmeh rastgoo | M.Sc. | Haddad Sabzevar | 2019-01-06 |
| Effect of particle size reduction to nanoscale by increasing the milling time and using the additives on mullite and zirconia crystallization | Pooneh Barfi sistani | M.Sc. | Mollazadeh Beidokhti | 2019-01-08 |
| Comparison of the machinabilities of ultra high carbon- high chrome steel and CK45 steel | mohammad tajabadi | M.Sc. | Kiani Rashid | 2019-01-15 |
| An investigation into the yield point phenomenon in a carbon steel with spheroidized cementite | roghaeh mortezaei | M.Sc. | Mazinani | 2019-02-04 |
| Refinement of water laden with heavy metals by coal ash | hanie saryan | M.Sc. | Vahdati Khaki | 2019-02-04 |
| Investigation the effect of route equal channel angular pressing process on the microstructure and mechanical properties of stainless steel 316 | mojtaba askarikhanabadi | M.Sc. | Farshidi | 2019-02-06 |
| Investigation on the effect of Molybdate on the Repassivation Potential of 304 Ausentic Stainless Steel and its Correlation with the Change the Pit dissolution Resistance | Amir Rokni | M.Sc. | Moayed | 2019-02-13 |
| The Effect of Substrate Carbon on Kinetic and Structure of Coated Layer, Obtained by TRD Technique. | Mohammad Javad Nazari Sabet | M.Sc. | Mirjalili | 2019-02-16 |
| The Use Of a Non-Destructive Metal Magnetic Memory Method in Determining Areas with reduced local thickness | raheleh kimiabakhsh | M.Sc. | Kashefi Torbati | 2019-02-17 |
| Aluminum-steel diffusion bonding by using a low melting temperature interlayer | mona abedinpour | M.Sc. | Mirjalili | 2019-02-17 |
| Synthesis of Fe18Cr8Ni steel alloy by carbo-aluminothermic reduction of metallic oxides | Mahmood Abbasiyan | M.Sc. | Mirjalili | 2019-06-11 |
| Alumina Recovery from coal waste by pyro-hydrometallurgy | abolqhasem sahebi | M.Sc. | Mollazadeh Beidokhti | 2019-06-22 |
| An investigation on the effect of combined heat treatment and severe rolling on the microstructure and hardness of aluminum 7005 alloy | reza bakhshi | M.Sc. | Farshidi | 2019-06-22 |
| Investigation of the Pitting Corrosion of 304 Austenitic Stainless Steel in Chloride Bearing Media which Contain Sodium Hypochlorite Biocide | Kamal Ashoori | M.Sc. | Moayed | 2019-06-24 |
| Investigation of the Inhibition Mechanism of Borate in the Pitting Corrosion of 304 Austenitic Stainless Steel | mohammad maroosi | M.Sc. | Moayed | 2019-06-24 |
| Investigation of relationship between stress and magnetic field leakage using metal magnetic memory method | akbar solatifard | M.Sc. | Kashefi Torbati | 2019-06-26 |
| The galvanic corrosion behavior of Monel 400 welded to copper by GTAW | mahla talari | M.Sc. | Moayed | 2019-07-02 |
| Possibility to Desulfurization of Coal by Alkaline Oxides | ali pasban | M.Sc. | Vahdati Khaki | 2019-07-03 |
| Investigation of the effect of different amounts of zinc oxide on the mechanical properties of mullite-zirconia composites | vahid khosrojerdi | M.Sc. | Kiani Rashid | 2019-07-15 |
| Determination of retained austenite at the surface of carburized 8620 steels after quenching by using magnetic hysteresis technique | salman ghashang | M.Sc. | Kashefi Torbati | 2019-07-27 |
| Synthesis and Characterization of Electrospun CNF-NiO Nanocomposites | Robabe Abdinia | M.Sc. | Kamali Heidari | 2019-08-03 |
| Investigation of YSZ nano particles on microstructure, high temperature oxidation and thermal cyclic fatigue behavior of gradient layer TBC produced by APS | arezoo sezavar | PhD | Sajjadi | 2019-09-01 |
| Identification grinding burns in steel parts by non-destructive magnetic hysteresis loop method | Hossein Norouzi Sahraei | M.Sc. | Kashefi Torbati | 2019-09-07 |
| Investigation of Thermal Behavior of (Ti41Zr25Be28Fe6)93Cu7 Bulk Metallic Glass During Isothermal Crystallization | Akram Abbasniabazeh | M.Sc. | Haddad Sabzevar | 2019-09-17 |
| Investigating of aluminum alloys A380 semi-solid casting by adding swarf and study of semi solid formation mechanism | hooman hadian | PhD | Haddad Sabzevar | 2019-09-17 |
| Corrosion Performance of Pb-Ca-Sn anode in Pb-lead acid battery by adding Strontium and Barium | reza darya | M.Sc. | Davoodi | 2019-09-21 |
| Investigation on the microstructure and mechanical properties of dissimilar titanium-zirconia joints | mohsen asghari | M.Sc. | Beidokhti | 2019-09-21 |
| Synthesis of Magnetic Metastable Iron Carbide Nanoparticles (Fe5C2 & Fe7C3) via a Thermal Decomposition Method | FATEMEH NAJARNIA | M.Sc. | Sajjadi | 2019-09-22 |
| The Effect of Morphology of Reinforcing Particles on the Mechanical Properties of Gelatin-Calcium Phosphate Composite Scaffolds | faezeh darvishian haghighi | M.Sc. | Mollazadeh Beidokhti | 2019-10-23 |
| Synthesis and Evaluation of Magnetic Properties of Nickel Foam decorated with Fe3O4 nanoplates | fatmeh bojabadi | M.Sc. | Sahebian | 2019-11-02 |
| Investigation of the effect reinforcing particle type on improving wear resistance of low alloy steel W500 by coated by GTAW welding | khadije zeinali | M.Sc. | Beidokhti | 2019-12-02 |
| Investigation effect of superhydrophobic surfaces fabrication process on the performance of organic and mineral corrosion inhibitors | amir hossein noorbakhsh nezhad | M.Sc. | Davoodi | 2019-12-22 |
| Designing and simulation of cathodic protection based on impressed current and sacrificial anodes of external storage tanks bottom of refinery complex | mohammad houshmand | M.Sc. | Davoodi | 2019-12-22 |
| Investigation of Microstructure and Mechanical Properties of Copper-Alumina Bonding by Brazing Method | saeed borhani | M.Sc. | Mollazadeh Beidokhti | 2020-01-20 |
| ٍEffect of Martensite Percentage on The Strain Rate Sensitivity Index In Dual Phase Steel | Mehran Salehifar | M.Sc. | Farshidi | 2020-01-21 |
| Formation of CuAlO2 via solution combustion synthsis | elham garmroodinezhad | M.Sc. | Mollazadeh Beidokhti | 2020-01-26 |
| The Effect of Aluminizing process on the Carburization Resistance of Stainless Steel | akram molaee | M.Sc. | Vahdati Khaki | 2020-01-27 |
| The Effects of manufacturing parameters on properties and characteristics of Sb2Te3 (p-type) nano-thermoelectric material fabricated by mechanical milling and spark plasma sintering (SPS) | Hamta Mansouri | M.Sc. | Sajjadi | 2020-02-08 |
| The influence of Al4C3 produced on carbon nanotube on the mechanical properties of Al/CNTs nanocomposite | simin heydari | M.Sc. | Sajjadi | 2020-02-12 |
| Improvement of relative elongation of aluminum alloy 5086 by applying variable strain rate | atefeh saeed | M.Sc. | Rezaee Bazzaz | 2020-02-15 |
| Exprimental Determination of forming limited diagram of a produced dual-phase steel and a recieved low carbon steel utilized for dual-phase steel production and comparing these figures with numerically predicted one | Melika Shahbazi Moghaddam | M.Sc. | Rezaee Bazzaz | 2020-02-17 |
| Influence of the amount and size of SiC reinforcement particles on the hot deformation behavior of AZ91-SiC nanocomposite | pegah attarian | M.Sc. | Sajjadi | 2020-02-17 |
| Investigation of Microstructure and Thermoelectric Properties on Tin Telluride Nano Material Produced by Mechanical Alloying and Spark Plasma Sintering | Amin Mojarrad Bahre | M.Sc. | Babakhani | 2020-02-18 |
| Assessment of oxidation behavior of AZ91 / SiC nanocomposite reinforced with different SiC values | Nooshin Asadollahi | M.Sc. | Sajjadi | 2020-02-19 |
| The effect of SiC particle size and amount on creep behavior of AZ91-SiC nanocomposite | bahare bahramizadeh | M.Sc. | Babakhani | 2020-02-19 |
| Selective adsorption metal cations from industrial water by using coal ash | Riyam Alokbi | M.Sc. | Mirjalili | 2020-05-10 |
| Investigating the effect of Sever plastic deformation operation ECAP on corrosion of aluminium 5052 alloy | SEYEDEH SAJEDEH POORMOOSAVI | M.Sc. | Moayed | 2020-05-21 |
| Fabrication of functional graded SiC-Si nano particles with Spark Plasma Sintering (SPS) and investigation the microstructure and mechanical properties | Abtin Heydarian | PhD | Sajjadi | 2020-09-15 |
| Synthesis and characterization of magnetic nanophotocatalyst with core/shell structure for water treatment: Removal of pathogen and heavy metal | naeemeh esfandiari | PhD | Kashefi Torbati | 2020-09-15 |
| Investigation of corrosion behavior of magnesium-graphene-magnesia nanocomposite biomass alloy in simulated body fluid | fateme poor eskandarioon | M.Sc. | Davoodi | 2020-09-19 |
| Investigation of microstructural changes and mechanical properties of cold work tool steels after heat treatment | mohammad zarei | M.Sc. | Kiani Rashid | 2020-10-03 |
| Investigation of methods to reducing iron losses in slag of steelmaking electric arc furnaces | Reza Alaei | M.Sc. | Babakhani | 2020-10-06 |
| Study of Electromagnetic Waves Absorption in Composites Reinforced by Iron-based Amorphous Particles and Carbon Nanotubes | Sare Moazen | M.Sc. | Sahebian | 2020-10-11 |
| Use of coal ash as a source of reinforcing particles in the production of aluminum-based composites by powder metallurgy and investigation of microstructural characteristics and mechanical properties | Mahdi Momeni | M.Sc. | Babakhani | 2020-10-13 |
| Investigation of microstructural changes during creep in different brazed zones of GTD-111 Nickel-based superalloy by transient liquid phase method (TLP) | javad asadi | PhD | Sajjadi | 2020-12-02 |
| Fabrication and characterization of thin-walled ultrafine-grained aluminum tubes through severe plastic deformation | REZA EMAMIDOUSTABAD | M.Sc. | Farshidi | 2021-01-18 |
| Investigation of the Effect of doping of Theranostic Ions and Surface Functionalization on the Physical and Biological Properties of Solution Combustion Synthesized Calcium Phosphates | Farzad Kermani | M.Sc. | Mollazadeh Beidokhti | 2021-01-25 |
| Effect of porosity content of compressed aluminum powder on its thermal conductivity | somayeh moghimi | M.Sc. | Sajjadi | 2021-02-05 |
| One-step Synthesis and Characterization of (Co, Mg, Ni, Cu, Zn) O High Entropy Oxide Particles through Solution Combustion Method | arghavan vojdani saghir | M.Sc. | Mollazadeh Beidokhti | 2021-02-13 |
| To Study the Kinetics of the Carbothermic Reduction of Hematite in Tunnel Kiln Process | seyyed mohammad ali haghi | PhD | Zabett | 2021-02-15 |
| Investigation of anodizing behavior in heterogeneous bonding of aluminum alloys by fsw welding method | saleh khadivi rofugar | M.Sc. | Davoodi | 2021-02-16 |
| The effect of severe plastic deformation process on corrosion properties of aluminum Al- 1.7Fe- 0.9Si- 0.5Cu | ali gholamzadeh | M.Sc. | Davoodi | 2021-02-18 |
| Investigation of the synergistic effect of ceftriaxone and tragacanth extract on corrosion inhibition performance on plain carbon steel | mohammadreza barroodi | M.Sc. | Davoodi | 2021-02-18 |
| The effect of severe plastic deformation by ECAP technique on electrochemical behaviour of positive grid alloy in battery solution | Abolfazl Amiri | M.Sc. | Moayed | 2021-02-27 |
| Preparation of Aluminum- matrix composite reinforced by Al-CNT nanocomposite | seyedeh yasaman bolandi | M.Sc. | Haddad Sabzevar | 2021-03-11 |
| Creating Roughness on the Surface of 6000 Series Aluminum Alloy by Chemical Etching Method and Investigating its Superhydrophobic Properties and Heat Transfer | mohammad reza attar | M.Sc. | Haddad Sabzevar | 2021-04-14 |
| Using magnetic Barkhausen Noise-BN- nondestructive technique in microstructural characterization and mechanical properties prediction of 42CrMo4 steel | vishtasb farsian | M.Sc. | Kashefi Torbati | 2021-04-17 |
| Simulation of Texture Evolution in Multi Axial Compression Process in Plain Strain Mode | younes lagzian | PhD | Rezaee Bazzaz | 2021-07-12 |
| The corrosion behavior of Monel 400 In chloride environment Contains sulfide and sulfate ions | amir reza sharifian | M.Sc. | Moayed | 2021-07-25 |
| The effect of adding carbon black and carbon nanotubes to polyethylene on the strength of its non-homogeneous joint to aluminum by Friction stir spot welding | Toktam Kianafshar | M.Sc. | Sahebian | 2021-07-25 |
| Investigation of 316 stainless steel pitting corrosion in the presence of sodium phosphate inhibitor | Alireza Jeishi | M.Sc. | Moayed | 2021-07-26 |
| An investigation on corrosion behaviour of Al alloy 6000 subjected to ECAP process associated to T8 heat treatment | Emad Ghamari | M.Sc. | Moayed | 2021-08-08 |
| Study on Friction Stir Additive Manufacturing of 316L Stainless Steel/AISI 4140 Alloy Steel | arman ghajari | M.Sc. | Beidokhti | 2021-09-14 |
| The effect of sodium phosphate corrosion inhibitor on pitting corrosion of 316 austenitic stainless steel in a solution containing NaOCl biocide | Amir Lalianpour | M.Sc. | Moayed | 2021-09-19 |
| Investigation of the effect of Thermechanical work on the corrosion behavior of Monel 400 alloy in 3.5% NaCl environment. | Ali Mirzaee | M.Sc. | Davoodi | 2021-09-20 |
| Pitting corrosion investigation of 316 stainless steel fined grain by ECAP | younes jahantighi | M.Sc. | Moayed | 2021-09-21 |
| Investigation of an organic corrosion inhibitor on corrosion behavior of mild steel in hydrochloric and sulfuric acid | sina zahedifard | M.Sc. | Davoodi | 2021-09-21 |
| Metal molybdenum extraction from Molybdenite concentrate of Sarcheshmeh complex by mechanochemical method | milad omrani boron | M.Sc. | Mirjalili | 2021-10-06 |
| Investigation of the effects of type, amount and size of particles used in the fabrication of stone cutting segments on their wear resistance | fahimeh moradi | M.Sc. | Sajjadi | 2021-10-13 |
| Using the mineral adsorbing substrates in order to eliminate the metal cations : Monte Calro simulation and Experimental verification | siavash mozafari nezhad | M.Sc. | Vahdati Khaki | 2021-10-16 |
| Synthesis of TiO2-CuO by combustion method and investigation of optical properties of particles | nahid javadi | M.Sc. | Mollazadeh Beidokhti | 2021-10-17 |
| Investigation of the effect of steel balls on the microstructure and mechanical properties of non-alloy gray cast irons | setayesh zaermiri | M.Sc. | Kiani Rashid | 2021-10-18 |
| Synthesis and characterization of Ni-NiO electrocatalyst for direct methanol fuel cells | mahla sarfaraz khabaz | M.Sc. | Mirjalili | 2021-10-18 |
| Investigation on dual-phase steel joining using friction stir spot welding(FSSW) | hadi bangi | M.Sc. | Beidokhti | 2021-10-20 |
| Effect of mechanical activation and initial carbon content on solid state carburization process of low carbon steels | Mohammad Hosseini | M.Sc. | Vahdati Khaki | 2021-10-21 |
| Effect of burning temperature of coal and coal’s gangue on phase and chemical characters of ash | kaveh eftekharnia | M.Sc. | Vahdati Khaki | 2021-11-01 |
| The effect of Bismuth on microstructure evolutions and mechanical properties of AZ31 alloy during the equal channel angular pressing process | javad yazdi | M.Sc. | Farshidi | 2021-11-01 |
| Evaluation of parameters affecting the morphology and corrosion behavior of ferrous metal foam produced from hematite powder by freezing casting method | Saman Rejali | M.Sc. | Kiani Rashid | 2021-11-03 |
| Fabrication and characterization of bioinspired soft composite actuator based on silicon-ethanol-graphene | Amir hossein Ebrahimi | M.Sc. | Sahebian | 2021-11-15 |
| Synthesis, characterization and thermal stability evaluation of nanostructured refractory high-entropy alloys of W-Mo-Cr-Ti-Al system by powder metallurgy method | Hamed Naserzoshki | PhD | Kiani Rashid | 2021-11-28 |
| Investigation of changes in physical properties and structural status of epoxy in glass fiber reinforced epoxy composite after fatigue loading | Seyed Alireza Moghadas Musavizade | M.Sc. | Zabett | 2021-12-26 |
| Selective adsorption of metal cations from aqueous solution using hydroxyapatite | esfandiar yekkalam | M.Sc. | Vahdati Khaki | 2022-01-13 |
| Effect of direct electric current on dendrite coherency point of Al-Si and Al-Cu hypoeutectic alloys | SALEH SAFARZADEH | M.Sc. | Haddad Sabzevar | 2022-02-19 |
| An investigation on the formation mechanism of double-layered Chromium carbide-Vanadium carbide coating using metal oxides by TRD on a carbon tool steel | mohammad reza najjari saadatabadi | M.Sc. | Sajjadi | 2022-03-02 |
| The effect of hydrothermal processes parameters on the chemical compositions and morphology of MnOx particles in the presence of NaCl | kosar aminian | M.Sc. | Vahdati Khaki | 2022-03-07 |
| Synthesis of PVA fiber/ CoFe2O4/ Cu Gradient Composite and Evaluation of its Electromagnetic Wave Shielding Performance | Zahra Yousefi | M.Sc. | Sajjadi | 2022-03-08 |
| Characterization and Electrochemical Efficiency of Carbonfiber/Molybdenum Oxide Nanocomposites Synthesized by Electrospinning Used in Supercapacitors | alireza chaji | M.Sc. | Sajjadi | 2022-03-08 |
| Synthesis and characterization of manganese oxides by solution combustion method | Mahsa Mohammadi Moghaddam | M.Sc. | Mirjalili | 2022-03-09 |
| Enhancing interfacial bonding and mechanical properties in carbon nanotube-reinforced aluminum matrix composites | Behzad Nateq | PhD | Haddad Sabzevar | 2022-05-18 |
| Investigation of formation mechanism and characterization of vanadium carbide -chromium carbide layered composite coating produced by thermal reaction method (TRD) on tool steel | OMID GANJI | PhD | Sajjadi | 2022-06-01 |
| Synthesis of Cu-Ni alloy nanopowder by reduction of nitrates from aqueous solution in SCS process | Amirali Safdari | M.Sc. | Vahdati Khaki | 2022-06-28 |
| The effect of bismouth content on the microstructure and creep behaviour of AZ31 alloy | behnoush talebpour | M.Sc. | Sajjadi | 2022-07-19 |
| The influence of porous steel products produced by powder metallurgy on isothermal phase transformations | mahdi yaghoubi | M.Sc. | Kiani Rashid | 2022-08-17 |
| The Effects of Temperatures and Fuel Type on the Borate Glass Structure Synthesized by the Solution Combustion Method | mehrnoosh ghanad | M.Sc. | Mollazadeh Beidokhti | 2022-09-05 |
| Investigation the effect of entropy on the properties and glass transition temperature (Tg) in glasses using molecular dynamics simulation method | ZAHRA MOLLAEE | M.Sc. | Mollazadeh Beidokhti | 2022-09-11 |
| Simulation of process parameters effects in spinning | Ahmad Mousawi | M.Sc. | Farshidi | 2022-09-12 |
| Effect of time and current on the dissimilar resistance spot joint of austenitic stainless steel/titanium using Ag-Cu interlayer | Danial Kazemi | M.Sc. | Beidokhti | 2022-09-14 |
| Influence of brazing temperature and time on microstructure and mechanical properties of stainless steel sandwich joints | masoumeh khayyat | M.Sc. | Beidokhti | 2022-09-19 |
| Electrodeposition of nickel sulfide on porous copper substrate for electrocatalytic application in hydrogen evolution reaction of water splitting | Seyed Erfan Hassanizadeh | M.Sc. | Mirjalili | 2022-09-19 |
| Static Recrystallization Kinetics of the stainless steel 316L after severe plastic deformation | Alireza Abooie | M.Sc. | Farshidi | 2022-09-20 |
| Investigating the chemical and thermal stability of borate glasses and the effect of CuO and ZnO addition on the glass transition behavior | negar akramii | M.Sc. | Mollazadeh Beidokhti | 2022-09-22 |
| Investigating the Effect of RSW electrodes Cu-Al2O3 and Cu-Cr-Zr on the electrode life and mechanical properties of galvanized steel welds DX54-D | Alireza Javdani Fard | M.Sc. | Beidokhti | 2022-09-22 |
| investigation the hot deformation effect on microstructure and mechanical properties of Ti-Mo alloys produced by SPS method | Mostafa Torabi Moghaddam | M.Sc. | Babakhani | 2022-09-22 |
| Influence of TRD parameters on the formation and characteristics of chromium carbide/vanadium carbide composite coatings formed on D2 tool steel | reza ebrahimi | M.Sc. | Sajjadi | 2022-09-22 |
| Synthesis and characterization of tungsten and molybdenum oxides for electrochromic applications | Anise Saberi Tanasvan | M.Sc. | Sajjadi | 2022-09-22 |
| Solution combustion synthesis of FeTiO3 powders and the effect of carbon on the synthesis process and physical properties of synthesized powders | Saman Soltani Alasvand | M.Sc. | Mollazadeh Beidokhti | 2022-10-18 |
| The effect of friction stir process on the corrosion behavior of commercial pure titanium in the human body simulated atmosphere | ehsan khajaviyan | M.Sc. | Farshidi | 2022-10-22 |
| Effect of welding parameters on the corrosion behavior of the dissimilar joining of 316L and St37 | Seyed Mohammad Ali Razavi | M.Sc. | Kiani Rashid | 2022-10-22 |
| Characterization and investigation of corrosion behavior of Plain Carbon Steel coated with alkyd resin-polyaniline-titanium oxide nanoparticles nanocomposite | faeza tawfeqi | M.Sc. | Mohammadi Zahrani | 2022-10-22 |
| The effect of temperature and pH on the Aluminosilicate ceramics crystallization made by sol-gel with the aim of applying particles prepared in the process of adsorption of heavy elements | salar moradi | M.Sc. | Mollazadeh Beidokhti | 2022-12-06 |
| Deformation of thin-walled aluminum tube under pressure process in the same angular channel | farshad dabaghi mahmooyi | M.Sc. | Rezaee Bazzaz | 2022-12-08 |
| The effect of initial microstructure on hot working behavior of D2 steel producing Esfarayen steel complex with aiming to identify the causes of failure | Mahboubeh Rezaiyan | M.Sc. | Kiani Rashid | 2022-12-19 |
| The effect of process variables on organic-aqueous phase separation in the Solvent extraction process of copper | Abolfazl Khaleghi Nejad | M.Sc. | Vahdati Khaki | 2022-12-26 |
| Microstructure and mechanical properties of spark plasma sintered Ti-Mo alloys | AliAkbar Rezaeian | M.Sc. | Babakhani | 2023-01-10 |
| Microstructure evolution, mechanical properties and corrosion behavior of similar and dissimilar welding joints of CORTEN-A weathering steel St12 low carbon steel by Gas-Metal Arc Welding technique with carbon dioxide shielding gas | Mehrdad Vatandoost | M.Sc. | Mohammadi Zahrani | 2023-01-28 |
| Effect of mechanical alloying and additive material on recovering of rare earth elements from fluorescent lamps | Elnaz Golestani | M.Sc. | Babakhani | 2023-01-29 |
| Investigating microstructure and hardness of 410 stainless steel during cold rolling and annealing afterward | Masoud Marandi | M.Sc. | Farshidi | 2023-01-30 |
| Investigation on behavior of fumaric acid on corrosion properties of FSP zone of Mg alloy | arash sedighi | M.Sc. | Beidokhti | 2023-02-13 |
| Preparation of homogeneous zinc oxide by solution combustion synthesis method and mixing it with different oxides to make varistor and investigate its microstructural and electrical properties | Zainab Mudher Ameen ALasadi | M.Sc. | Mollazadeh Beidokhti | 2023-02-15 |
| Effect of temperature on corrosion properties of Ti-6Al-4V welds using GTAW method | mahdi farqadani | M.Sc. | Beidokhti | 2023-02-19 |
| The effect of the thickness and dimensions of the connection on the structural and mechanical properties of the sheet Plug welding Aluminum 5083 to extruded profiles 5083 and 6063 by GTAW method | saeid shamsaei | M.Sc. | Haddad Sabzevar | 2023-02-20 |
| Characterization of Structure and Properties of ZnO/CoO/Al2O3 Nano-pigments, Synthesized by Solution Combustion Method | Parisa Geransayeh | M.Sc. | Vahdati Khaki | 2023-02-22 |
| Investigation on a Hybrid Polyethylene-Aluminum Joint Using Friction Stir Spot Welding and Cyanoacrylate Layer | Shokoofeh Mehri | M.Sc. | Beidokhti | 2023-02-25 |
| Prediction of stress-strain curve of 5086 alloy using Support vector machine (SVM) | Behnam Valipour | M.Sc. | Rezaee Bazzaz | 2023-02-25 |
| Connecting the diamond to the steel body of the disc saw blade by soldering method and investigating the microstructure and mechanical properties | reza ghorbani | M.Sc. | Haddad Sabzevar | 2023-02-26 |
| Solution combustion synthesis of nanoparticles of copper and copper oxides to investigate the morphology and antibacterial behavior | seyedeh vesal helali | M.Sc. | Mirjalili | 2023-02-26 |
| The effect of cryogenic heat treatment variables and hot work on the morphology of carbides and wear properties of tool steel D3 | reyhaneh ganji | M.Sc. | Kiani Rashid | 2023-03-13 |
| Recovery of rare earth elements(Y& Sc ) from red mud by hydrometallurgical leaching process | Mohsen Hajizadeh Navakh | M.Sc. | Babakhani | 2023-04-15 |
| Effect of tool rotational speed and FSP pass number on microstructural and hardness of CP Ti | maryam ali sami albandar | M.Sc. | Beidokhti | 2023-04-18 |
| Electrodeposition and Characterization and Investigation of Corrosion Behavior of Nanostructured Nickel-Copper Coating | Abolfazl Shakeri | M.Sc. | Mohammadi Zahrani | 2023-05-13 |
| investigation of microstructure, mechanical and corrosion properties of powder metallurgy aluminum bronze nano composite parts, reinforcement by alumina particles | Razieh Rezaeirad | M.Sc. | Babakhani | 2023-05-24 |
| Microstructure evolution and hardness variations during Equal Channel Angular Pressing of Aluminium alloy 7075 | ehsan alizadeh | M.Sc. | Farshidi | 2023-07-02 |
| Investigating changes in hardness and microstructure of aluminum alloy 2024 after heat treatment and over aging by applying pressure in the same angular channel | elahe ramesh | M.Sc. | Farshidi | 2023-09-10 |
| Synthesis and characterization of Ni-Cr-Mo coating produced by SHS-GTAW method | Mostafa Tahari | PhD | Vahdati Khaki | 2023-09-12 |
| Recovery of lithium and cobalt compounds from lithium-ion batteries by hydrometallurgical method | Maryam Khalili | M.Sc. | Kiani Rashid | 2023-09-17 |
| Fabrication and Performance Evaluation of Bioactive Glass-Hydroxyapatite Composite in Simulated Body Fluid (SBF) Enviroment | Davood Zahiri Rad | M.Sc. | Vahdati Khaki | 2023-09-17 |
| Effect of temperature and time on strength and microstructure of multi-layer diffusion bonded stainless steel | Mahyar Mehran | M.Sc. | Beidokhti | 2023-09-19 |
| Electrodeposition of Nickel Micro-Nanostructures and Evaluation of Electrocatalytic Activity Toward Methanol Oxidation Reaction (MOR) | HamidReza Azimaee | M.Sc. | Mirjalili | 2023-09-21 |
| Investigating Microstructural, Mechanical and Thermal Fatigue Properties of Mullite Gradient Thermal Insulation Coatings by APS Method on Aluminum Alloy | Masoomeh Bondar | M.Sc. | Sajjadi | 2023-09-23 |
| Application of YSZ Gradient Thermal Barrier Coating Created by APS Method on Aluminum Alloy and Investigation of Microstructural, Mechanical, Thermal Fatigue and Oxidation Properties | Mahtab Soroush Moghaddam | M.Sc. | Sajjadi | 2023-09-25 |
| decoration of | atiyeh neyshabouri mohammadabdi | M.Sc. | Sahebian | 2023-09-25 |
| Study of the effects of mullite and YSZ hybrid coatings in different thicknesses produced by APS on IN-738LC substrate | Hesamaldin Azizzadeh | M.Sc. | Sajjadi | 2023-09-26 |
| the effect of temperature and pressure of comperession moulding on formation of segregated structure of HDPE /carbon black | Ali Shajari | M.Sc. | Sahebian | 2023-09-30 |
| Producing Copper Nanoparticles Directly from Copper Oxide Mineral via Solution Combustion Synthesis | Sobhan Alamdari | M.Sc. | Vahdati Khaki | 2023-10-05 |
| Kinetic study of multi-layer Cr carbide/V carbide composite coatings produced by thermo-reactive diffusion in pack cementation. | Mina Dadkhah | M.Sc. | Sajjadi | 2023-10-12 |
| Evaluation of the level of protection against electromagnetism of composite with isolated structure of energy density polyethylene and carbon nanotube | reihaneh rezania | M.Sc. | Sahebian | 2023-10-14 |
| The effect of non-isothermal deformation on microstructure and Alpha phase globularization Ti-6Al-4V alloys / | Fahimeh Sistani najafabadi | M.Sc. | Rezaee Bazzaz | 2023-10-30 |
| Study effect of LDPE presence in grainbundaries on HDPE/CB composite with segregated structure on mechanical properties and electrical conductivity | Seyedmehran Teimoorytofal | M.Sc. | Sahebian | 2023-12-04 |
| Investigating the microstructure and hardness of stainless steel 409 after process Equal Channel Angular Pressing | Neda Shahsavari | M.Sc. | Farshidi | 2023-12-05 |
| electrodeposition of Ni-Fe-Mn-S as electrocatalyst for hydrogen evolution reaction | Sohrab Azimi | M.Sc. | Kiani Rashid | 2023-12-13 |
| The effect of type of additives on the microstructure and mechanical properties of 58S bioglass calcium phosphate biocomposites | Masoud Azizi | M.Sc. | Mollazadeh Beidokhti | 2023-12-30 |
| Synthesis of nanostructured high entropy (Fe, Mn, Ni, Co, Cr)3O4 oxide by solution combustion synthesis and the investigation of its high temperature behaviour | azar esmaeilzaei | PhD | Vahdati Khaki | 2024-01-27 |
| Investigating the microstructure and mechanical properties of thin-walled copper tube processed by ECAP method | Iman Safarnezhad Moghani | M.Sc. | Rezaee Bazzaz | 2024-02-04 |
| Mechanisms investigation of globularization of Ti-811 during Static heat treatment and after deformation | samira jafari | M.Sc. | Ebrahimi | 2024-02-17 |
| Electrodeposition of WO3 and the effect of different dopants on its electrochromic properties | Parisa Kazemi Zade | M.Sc. | Mirjalili | 2024-02-17 |
| Investigating the morphology and volume percentage of graphite on the mechanical properties of silver-graphite composites produced by powder metallurgy | Amirhossein Mehrbani | M.Sc. | Babakhani | 2024-02-19 |
| Influence of hot deformation on mechanical properties and microstructure of low-carbon vanadium microalloyed steel | Mohammad javad Berenj koob Toosi | M.Sc. | Ebrahimi | 2024-02-19 |
| To investigate the carbothermic reduction of iron concentrate / pellet fine / iron oxide scale in a similar way to Hoganus process | mohammad sadegh abbas pour | M.Sc. | Zabett | 2024-02-19 |
